Undergraduate Academic Advising

for Mechanical Engineering


Undergraduate Academic Advising is available for 2019 Spring Semester. Please find advising office hours indicated below and make every effort to come and visit us. Academic Hold can only be removed after in-person discussion. No email request for academic hold removal is accepted.

ME Electives Spring 2019

  • Aerodynamics, AE-UY 4613, Mon/Wed 3:00 to 4:20pm
  • Propulsion, AE-UY 4633, Mon/Wed 12:30 to 1:50pm
  • Vibrations, ME-UY 4223, Tue/Thu 12:30 to 1:50pm
  • Biofluids, ME-UY 4643, Mon/Wed 4:30 to 5:50pm
  • BioMEMs, ME-UY 4653, Tue/Thu 11:00am to 12:20pm
  • Manufacturing Engineering and Processes, ME-UY 4853, Mon 6:00 to 8:50pm
  • Corrosion and NDE, Tue/Thu 4:00 to 5:20pm
  • Intersection of Engineering, Law, and Business, ME-UY 4983A, Mon 3:00 to 5:50pm
  • Electronic Packaging, ME-UY 4983I, Wed 6:00 to 8:50pm

Tandon Global Study Away program at London

Tandon Global Study Away program at London starting from 2019 Spring semester provides Tandon school of Engineering student friendly curriculum. It fits best for Sophomores who are considering "Study Abroad". For more information, please click here. Make sure you also visit the NYU "STUDY ABROAD" site for other information as well.


Spring 2019 Registration Hold Removal

Regular advising session for 2019 Spring semester is now open for all ME students. Please stop by the ME UG academic advisors to discuss courses for the spring 2019 semester as well as remove your academic HOLD. Please note that your academic HOLD is only removed by visiting the ME UG academic advisors.

Please come prepared with a tentative schedule for next semester. 

 Professor Lee

  • Sophomores and Juniors

Professor Borowiec

  • Seniors
  • Students In 3+2 Programs

Undergraduate Advisor Schedule

Please note that academic advising office hours will be updated weekly and check it before your visit.

Sophomores and Juniors

Professor Lee
Email: sh.lee@nyu.edu
Office: RH524C

  • Please contact for an appointment.

Seniors /Students In 3+2 Programs

Professor Borowiec
Email: borowiec@nyu.edu
Office: RH524

  • Please contact for an appointment.

Registration Hold Removal

Electronic registration hold removal is done in person. Please refer to the instructions in the email sent out every semester regarding upcoming course registration details. Advising hours are posted on this page each week during peak registration periods, and no appointments are necessary or honored. Kindly come prepared to discuss the courses you plan to enroll in the following semester.

General academic advising is available throughout the semester. Appointments are not honored during peak registration periods.

Permission Numbers

Each department administers the permission numbers for their courses. The ME Department only provides permission numbers for courses beginning with the prefixes AE-UY and ME-UY. Please click here for the list of all academic advisors at the School of Engineering.


Withdrawing From A Course

Once registration ends you cannot withdraw from a course using Albert. The only way to drop the class is via a paper form process at the Office of Records and Registration in LC260.

  • If the course is not linked as a co-requisite to another course, no advisor signature is required (even though an advisor signature line is included on the form). Please use the add/drop form and bring it to room LC264. 
  • If the course is linked as a co-requisite to another course, an advisor signature is required. Please bring the co-requisite waiver form to your advisor for a signature, and then to LC264.

Undergraduate Curriculum Changes

Minor changes to the Bachelor of Science in Mechanical Engineering degree may occur during your tenure at the School of Engineering. In general, students continue to follow the curriculum in existence during their first semester of attendance.

However, a student can change from their original curriculum to a newer one. But it is not permissible to mix and match requirements from differing curriculums. Each requirement from a particular curriculum must be met in order to graduate. Please feel free to stop by if you have questions.

Humanities Electives

Humanities requirements consist of two semesters of freshman writing and constraints on remaining electives. 

Students must complete at least 24 total credits of humanities, which includes the freshman writing sequence. At least one elective must be:

  • level 3 or higher, and
  • intensive writing (not including freshman writing)

The overall requirement is at least 24 credits, regardless of how the courses add up in credit value. Please click here for a list of those offered at Tandon.

Previously approved humanities electives taken at the Manhattan campus can be viewed by clicking here.

ME/Technical/Non-Technical/Free Electives

Please note:

  1. Courses which mimic those in the Mechanical Engineering program (e.g., Statics offered by Civil Engineering) cannot be used as an elective
  2. Courses offered by NYUSPS (School of Professional Studies) cannot be used toward a degree program at Tandon

ME Elective: Any course not required for the degree and begins with the prefix AE-UY, ME-UY, or MT-UY. 

Technical Elective: Any level 2 or higher engineering course not required for the degree and is offered by one of the departments below:

  • Chemical and Biomolecular Engineering
  • Civil and Urban Engineering
  • Computer Science and Engineering
  • Electrical and Computer Engineering
  • Financial and Risk Engineering
  • Mechanical and Aerospace Engineering

Non-Technical Elective: Any course not required for the degree and is either math, pure science (e.g., biology, chemistry, or physics), or humanities.

Free Elective: Any course not required for the degree. Free electives were not introduced into the BS in ME degree until Fall 2013, and replaced the Technical and Non-Technical electives.

If a graduate level course is applied to an elective above, it cannot be used to fulfill a graduate degree requirement.

Course Pre/Co-Requisite Summary

All courses with descriptions and requirements can be found in the Bulletin. As a courtesy, all of the requirements for courses contained in the Bachelor of Science in Mechanical Engineering curriculum have been summarized here.

Graduation Checklists

Below are checklists for the associated curriculums:

Starting Fall 2014 (131 credits)

Fall 2013 To Spring 2014 (130 credits)


ME Department Level Academic Probation

All ME majors who started at the School of Engineering during fall 2012 or later are subject to department level GPA requirements. The School of Engineering has separate GPA requirements related to academic disqualification.

Any student who is academically disqualified from the ME Department has until the date specified in their disqualification notice (often the week before the first day of classes in a subsequent semester) to enter a new major. If the student does not find or is not accepted by another major by this date then the student effectively becomes disqualified from the School of Engineering.

In general, the ME Department requires a 2.5 GPA for students wishing to change their major to ME.

  • As part of the ME Department's residency requirement, all junior and senior mechanical engineering courses must be taken at Tandon.